BMX : 22.2
The stem that is strong enough for freestyle and light enough to race. 6 bolts up front to hold your bars no matter what.The 50mm wide clamp length and patented undercut around the handlebar combine to grip the handlebar more securely. Thomson’s “two clamps in one” design provides a stiff ride with minimal flexing or squeaking.
Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB
The Thomson stem has passed extensive life and ultimate strength tests.
We have an on-going testing program to ensure that every production lot of our stems meets Thomson standards.
The stem is annodized to prevent corrosion, and maintain a nice appearance. Thomson BMX stems are available with a black or silver anodize finish.
6 M6 bolts hold the handlebar firmly in place.
Lightweight, the BMX Stem weighs 255 grams.
Built in spacer on stem body clears gyro and eliminates the need for a separate loose spacer.
Every component of the Thomson BMX stem, including the fasteners, is 100 percent American made.
The Thomson stem is designed to have the best combination of stiffness, lightweight, strength, and durability.
| Model Number | Stem Description | Size | Retail Price |
| SM-E156 | 1-1/8″ x 0° x 50mm x 22.2mm | 255 g | $99.95 |
A – No, we are not planning to add new colors.
Q – Can I buy a stem direct from Thomson?
A – L. H. Thomson Co. does not sell any bike products directly to consumers or Dealers. We sell directly to Distributors and OEM’s only. Your bike store can order all of our products from our distributors.
Q – Where can I order a stem?
A – Contact your local bike shop. If the bike shop is out of stock, they can order any of our products from one of our distributors.
Q – What is the cost of a Thomson stem?
A – See our stem price list for Bike Stems.
Q – What is the height of the stem that goes over the steerer tube?
A – 38 mm
Q – What is the minimum insertion length (height) for the steerer tube into the stem?
A – 35 mm – 1.380″. Note: The insertion length must be measured after any spacers are added below the bottom of the stem.
Q – I lost my bolts, and I can’t find any at the hardware store. Are they special? Where can I get some?
A – Our bolts have been specially designed to work with the Thomson stem. Our bolts are made of a high strength steel alloy, and go through an extra manufacturing process that increases their fatigue life. Also, Thomson stem bolts are plated to prevent rust and corrosion. Only use bolts that have been tested by Thomson. Contact your local bike shop for replacement bolts.
Q – Can I use Titanium bolts on the Thomson BMX stem?
A – No, do not use titanium bolts for BMX.
Q – Will spacers work with the Thomson stem?
A – Spacers will work as long as your steerer tube is long enough. The steerer tube must be inserted at least 1.38 inches (35 mm) into the Thomson stem after the spacers are in place below the stem.
Q – Do you have a Thomson headset cap?
A – Yes, contact your local bike shop.
Q – What colors are Thomson Elite stems available in?
A – Black and Silver