Ti, Wide and Handsome. Saddle up and ride.
|Model Number||Handlebar Description||Weight||Retail Price|
|HB-E108||730mm x 6° backsweep x 31.8||310 g||$249.95|
|HB-E109||730mm x 12° backsweep x 31.8||310 g||$249.95|
|HB-E113||780mm x 15mm rise x 8° backsweep-5°upsweep x 31.8||345 g||$389.95|
A – No color options, our bar is finished with a Scotch-Brite™ brushed finish.
Q – Can I paint my bar?
A – Yes you may. Do not powder coat or subject to heat above 140 degrees.
Q – The recommended torque is only only 4 to 5 Nm. Is that enough?
A – Yes. Use a torque wrench. 5Nm for two bolt stems, 4Nm for 4 bolt stems is the maximum.
Q – May I cut down my Titanium bar?
A – Yes. You will need a very high quality saw blade and a lot of patience, Titanium is a hard material to cut. For best results use a miter block to cut Titanium.
Q – Should I use friction paste or anti-seize on my Titanium handlebar?
A – No. There should be nothing used on the clamp area of the bar or stem. The bar and the clamp need to both be clean and free of any grease, Ti prep, anti-seize, friction paste, etc. Nothing should be used on the clamp area of the bar or stem.
Q – Where are the Ti bars made?
A – Our Ti bars are proprietary designs made for us in Taiwan.
This warranty does not cover damage from crashing, abuse, modification or improper installation. Thomson defines abuse as using a product outside its intended design. If you believe you have a warranty claim return your product to Thomson for evaluation. Please include the original receipt from the authorized seller. Auction based websites are not authorized sellers of new Thomson products.
If you do not have your original receipt warranty is from date of manufacture.
7800 NE Industrial Boulevard
Macon, GA 31216